TBI Triple Bright International, Ltd

eballast  

                  930 Grand Provincial Ave.
                  Matthews, NC 28105

                  Telephone: (704)845-0878    Fax: (704)845-0879

Home Page About Us CFL HID Ballast HID Lamp Projection Lamp
Product > HID Ballast > General HID Electronic Ballast
click see large picture click see large picture click see large picture
 

• Main Products:

Electronic ballasts for high-intensity discharge lamps (HID)

Series for High Pressure Sodium lamps:   

  110V 60Hz:  75W, 100W, 150W, 250W, 400W
  220V 50Hz: 70W, 100W, 150W, 250W, 400W
  220V 50Hz:

70W X5, 100W X5, 150W X3, 250W X2

150W+70W, 250W+70W, 400W+150W

220V 50Hz: Light modulating Products
    Power 400W into 250W or 150W
    Working time:

19:00-24:00 at 400W

24:00-06:00 at 250W or 150W

    Time for power drop: 10-20 min for dropping from400W to 250W or 150W

Series for Metal-Halide lamps:

     
 

100V 60Hz: 175W, 250W, 400W

220V 50Hz: 150W, 250W, 400W

   
           
 

• Product Features:

High efficiency

High energy saving

Under the circumstances of same voltage and brightness, the drawing current of electronic ballast

is only equal to one third to one fourth of that of the traditional magnetic ballast. In other words,

the supply mains can be cut down by one third to one half, if the electronic ballast is used, the

capacity of the electric transformer can be reduced in the same radio. Our brand electronic ballast

can save 15% of the active power. It can not only save lots of initial investment, but also

bring considerable long-term profit to the customers.

 

Green Light

The power factor is large than 0.99. The total harmonic is less than 10%. There hardly any influence on the supply mains. it is real Green Light product.

 

Wide range of voltage adaptation

They can work normally when the input voltage changes between 90V and 260V. So electronic ballasts excels magnetic ballast in the voltage adaptation.

 

Stable power output

When the voltage fluctuating, the power provided by the electronic ballast keeps

 

Easy to mount and use

When it is used with high-pressure sodium lamp, it needs neither the igniter which magnetic ballast must be equipped nor the capacitor.

     
  • Main Technical Specifications:

Power factor > 0.99

Total harmonic < 10%

Input voltage : 90V-260V

Sourrounding temperature : -30°C--- +60°C (-22°F--- +140°F)

--Protection against open circuit, short circuit, lamp leakage or broken.

--Automatic transient power off detection and can turn on again automatically.

--Energy savings up to 28% and lamp life increased by up to 35% compared to conventional ballasts

--High quality light (absolutely flicker-free)

--No color deviation of HQI metal halide lamps due to mains voltage fluctuations.

--Fast lamp warm-up (50% faster)

--Very silent due to the HF operation.

Electronic Ballasts for High-intensity Discharge Lamp (HID)
Type   J175W-MH J250W-MH J400W-MH N70W-HPS N100W-HPS N150W-HPS N250W-HPS N400W-HPS
Lamp Type   Metal-Halide 175W Metal-Halide 250W Metal-Halide 400W High pressure sodium 70W High pressure sodium 100W High pressure sodium 150W High pressure sodium 250W High pressure sodium 400W
Input Voltage range AC (V) 90-260
Input Frequency (Hz) 0-50/60
Operating Frequency (kHz) 30
Input Current (A) 0.8 1.2 1.8 0.3 0.5 0.7 1.2 1.8
Power factor   0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99
Line Harmonics   <10%
Starting Time (sec) <0.5( cold lamp)
Operating temperature (°C) -30  ----  +60
Average Life (Year) 5
Weight (Kg) 2.4 2.4 2.4 1.2 1.2 2.4 2.4 2.4
QTY-per pack   6 6 6 6 6 6 6 6
 

Dimensions : (mm)

N400W-HPS

J175W-MH

J250W-MH

J400W-MH

N150W-HPS

N250W-HPS

N70W-HPS

N100W-HPS

 


[Home Page]

[About Us]

[CFL]

[HID Ballast]

[HID Lamp]

[Projection Lamp]

 

Please contact us: tbil@tbil.com  with questions or comments.
© Copyright 2004. Triple Bright International Ltd. All rights reserved.